Backsplash Installation Los Angeles | Kitchen & Bathroom
Los Angeles Kitchen and Bathroom Remodeling has served Sherman Oaks, Encino, Studio City, Calabasas, and the broader San Fernando Valley as a licensed kitchen and bathroom remodeling contractor since 2019.
Los Angeles Kitchen and Bathroom Remodeling has served Sherman Oaks, Encino, Studio City, Calabasas, and the broader San Fernando Valley as a licensed kitchen and bathroom remodeling contractor since 2019. From subway tile to natural stone, our backsplash installation service handles subway tile, mosaic, marble, glass, and natural stone — with complete template layout, precision cutting, and professional grout work included on every job.
Whether the material is subway tile, mosaic, marble, glass, or natural stone, every job includes complete template layout, precision cutting, and professional grout work — not just tile placement. That distinction matters when you're dealing with the open-concept kitchens common in Encino, the original mid-century floor plans being renovated throughout Studio City, or the clean-lined modern builds rising through Calabasas. Tight seams and accurate templating are what keep an installation from needing early correction — the difference between a finished result and one that has to be revisited.
Jobs that involve adjacent plumbing outlets, custom stone cuts, or a full kitchen remodel really need a licensed general contractor who can coordinate every trade — not a piecemeal approach. That's exactly what our team at 4419 Van Nuys Blvd, Suite 407, Sherman Oaks, CA 91403 provides. Call us at +1 (310) 890-4885 to discuss your project.
Straight grout lines at consistent joint spacing. Clean cuts wrapping tight around electrical outlets. Tiles meeting cabinet edges without gaps or lippage. Professional templating addresses those details before the first tile is set, rather than correcting for them mid-installation.
Material choice amplifies the result dramatically. A full-height marble slab running floor-to-ceiling behind a range creates a visual anchor that transforms the entire kitchen. That same space fitted with a narrow ceramic strip reads as an afterthought. Clients who invest in the right material and proper installation see that difference reflected immediately in how the room feels.
Sealed natural stone resists heat and staining; correctly mixed and cured grout doesn't absorb moisture the way improperly mixed grout does — avoiding the early regrout or tile replacement that adds cost later.
Combining backsplash work with countertop replacement or custom cabinetry through our team produces a cohesive finish because every trade is coordinated under one contractor. Grout color, countertop tone, and cabinet finishes are aligned from the start rather than reconciled after the fact.
Backsplash work consistently delivers visible results in kitchens and bathrooms where the existing tile is dated or the substrate behind the wall covering has been compromised. In a kitchen where aging ceramic tile behind the range is replaced with a floor-to-ceiling subway backsplash, the change in how the room reads is immediate — and the sealed grout surface performs better against grease than an unsealed original.
In bathroom vanity areas where painted drywall has been used as a substrate in a wet zone, the correct approach is removing that drywall, installing a waterproofed substrate, and finishing with tile. That sequence eliminates the underlying moisture problem while producing a surface that handles daily water contact without damage.
Getting the templating right is what determines whether an installation looks precise or thrown together. Outlets, switch plates, undersides of cabinets, and irregular wall surfaces all require precise field cuts — that's standard practice for a professional tile installer, not an afterthought.
Grout color shapes how a finished installation reads, and it's surprisingly hard to undo once the tile is set. We had one client in Studio City who initially wanted a near-white grout on dark slate — a combination that would have aged poorly in a high-traffic kitchen. Walking through the options with their countertop and cabinet finishes side by side, they landed on a warm mid-tone that tied the whole room together. That kind of deliberate selection is what our team brings to every project. Reach out through our contact page to start planning your backsplash project.
Subway tile is a widely used backsplash material across the San Fernando Valley. Ceramic and porcelain subway tile installed in straight, offset brick, or herringbone patterns works with a broad range of cabinet styles — from shaker to flat-panel — and holds up reliably under daily kitchen use.
Glass mosaic and ceramic mosaic tiles arrive on mesh-mounted sheets that require careful seam alignment and precise field cuts at every border. Keeping patterns consistent across the full installation depends on wet-saw precision and careful layout planning before any tile is set.
Marble backsplashes — Carrara, Calacatta, and Statuario among them — require handling appropriate to the material's sensitivity. Marble installations include sealed application and controlled grouting to protect the surface from staining. Homeowners considering a marble kitchen or bathroom backsplash can explore our Woodland Hills remodeling services for examples of how we apply this material in high-end residential settings.
Glass tile requires diamond blade wet-saw cuts and careful thinset selection to maintain the appearance of translucent tile faces. Natural stone options including travertine, slate, quartzite, and stacked ledger stone each have specific installation requirements, and our team addresses those requirements individually rather than applying a uniform approach across all stone types.
Every backsplash installation begins with templating — measuring the wall field, locating outlets, switches, and obstacles, and mapping the tile layout before a single piece is cut. Getting this right means grout lines land symmetrically against cabinet doors, range hoods, and countertop edges, so there are no mid-install corrections that throw off the final pattern.
Surface preparation follows templating. Existing tile is removed, drywall is inspected and repaired, and wet areas — bathroom vanity backsplashes in particular — receive cement board or a waterproof membrane before tile is set. Skipping substrate preparation is a leading cause of backsplash failure that requires early tile replacement.
During setting, field tiles go up first. Thinset selection is matched to the tile material — glass and translucent stone have different requirements than opaque ceramic and porcelain. Border cuts, outlet notches, and mitered corners are made with a wet saw on-site. Large-format tiles and marble pieces are back-buttered individually for full-contact adhesion.
Grout is mixed to a consistent texture, applied with a float, and wiped in stages to control haze. Natural stone, porous grout colors, and any bathroom installation exposed to regular moisture receive a sealer after full cure. If you're planning a backsplash project, call us at +1 (310) 890-4885 to schedule a free online estimate.
The wall behind the range or cooktop is the visual centerpiece of most Los Angeles kitchens — and the zone that absorbs the most heat, grease, and steam. Material selection here carries real consequences: glass tile reflects light but shows grease faster than a matte subway tile paired with dark grout, which hides residue between cleanings without sacrificing design.
Many clients in Encino and Studio City go further with a full kitchen surround — tile running continuously from countertop to upper cabinet across every wall, eliminating painted drywall entirely. The result is a unified surface that's far easier to clean and dramatically more durable than drywall in a cooking environment.
Under-cabinet termination is a detail that separates professional installations from amateur ones. Every installation our team completes finishes with a straight grout line or caulk joint beneath the upper cabinet — never a raw tile edge — with cabinet depth and rail position accounted for during templating.
When backsplash work is paired with quartz or granite countertop installation — a common combination through our full remodeling services — tile goes up only after the countertop is set. The bottom course of tile then rests directly on the stone, with a caulk joint along that seam that flexes with seasonal movement rather than cracking. That sequencing prevents one of the most common backsplash failures we correct in homes across the San Fernando Valley.
Bathroom backsplash installation carries waterproofing requirements that kitchen work simply does not — and skipping those steps creates mold problems behind tile that aren't visible until the damage is severe. Behind every vanity and sink wall our team tiles, the painted drywall comes out first. Cement board or a waterproof membrane goes in its place, creating a substrate that handles daily water contact without swelling or supporting mold growth.
Tub decks and drop-in tub surrounds — common in Sherman Oaks and West Hills bathroom remodels — are frequently finished in large-format marble or natural stone. These installations require a fully waterproofed substrate, individually back-buttered tiles for complete adhesion, and sealed grout joints that lock out soap scum and moisture intrusion over years of use.
In powder rooms throughout the San Fernando Valley, a mosaic or patterned tile backsplash behind a floating vanity often serves as the room's only tile surface — functioning as a full design statement rather than a background element. Our team helps clients choose a pattern scale proportional to the room so the tile reads as intentional rather than overwhelming.
Every bathroom backsplash installation includes grout sealing as a standard step, not an upsell. Natural stone tile also receives a penetrating stone sealer after full cure. These aren't optional finishing touches — they are part of how bathroom tile gets installed correctly from the first day forward.
Los Angeles Kitchen and Bathroom Remodeling installs kitchen and bathroom backsplashes throughout the San Fernando Valley from our Sherman Oaks office at 4419 Van Nuys Blvd, Suite 407, Sherman Oaks, CA 91403 — a central Valley location that puts us close to every community we serve. Our primary service areas include Sherman Oaks, Encino, Studio City, Calabasas, Tarzana, and Woodland Hills, along with the broader Valley corridor stretching from Van Nuys to West Hills.
The homes we work in vary significantly by geography. Ventura Boulevard corridors through Sherman Oaks and Studio City feature classic mid-century layouts where backsplash tile work is part of a broader kitchen refresh. Hillside properties above Mulholland Drive present custom-footprint kitchens that require particularly precise templating. Tract homes near the 405 and 101 interchange in Van Nuys and Encino typically feature standard cabinetry runs where clean symmetrical layouts matter most. Newer builds in the western Valley near Calabasas often call for larger-format stone and glass tile to match contemporary finishes.
Homeowners in Reseda, Porter Ranch, and North Hollywood are equally welcome to request a free online estimate — just send photos and project details and we'll provide a detailed written quote. Onsite consultations are also available across all these neighborhoods for anyone who wants an in-person walkthrough before committing to any tile work.
Backsplash tile is almost always one component of a larger project — and sequencing determines whether the final result looks intentional or improvised. In kitchen remodels, our team installs backsplash only after countertops are set and upper cabinets are hung. That order ensures every grout line terminates correctly against the stone edge below and the cabinet rail above, rather than floating awkwardly in open space.
In bathroom remodels, vanity backsplash tile is coordinated with walk-in shower tile, floor tile, and vanity installation from a single project plan. When one contractor manages all three surfaces — as we do across full Burbank and Lake Balboa remodels — grout color, stone veining, and tile format align across the room instead of clashing between trades.
A common problem on jobs where tile is subcontracted separately is an outlet box positioned after the fact — sitting 3/4 inch off from where the tile layout expects it. Because our team handles licensed plumbing and electrical rough-in in-house, outlet boxes and plumbing stub-outs are positioned before tile goes up. That eliminates forced field cuts and misaligned plates entirely.
Clients working through a full kitchen or bathroom renovation with us deal with one point of contact from demolition through final grout sealing. Reach out through our contact page to discuss how backsplash work fits your larger project.
Starting a backsplash project with Los Angeles Kitchen and Bathroom Remodeling takes four straightforward steps. First, request a free online estimate by sending photos of your existing wall, countertop surface, and cabinet style along with the dimensions of the area to be tiled — a detailed written quote comes back without requiring an in-home visit.
Second, our team walks you through every material option — subway tile, mosaic, marble, glass, and natural stone — with specific attention to your kitchen's heat exposure, the bathroom's moisture level, grout joint preference, and the finishes already in place. Material selection is never generic; it's matched to your specific environment.
Third, once your material is chosen and the estimate is approved, we schedule a templating visit to take precise field measurements and confirm substrate requirements before tile is ordered. This step prevents the mid-install corrections that compromise finished installations.
Fourth, tile is set, grouted, and sealed in a single coordinated sequence. At completion, every client receives a walk-through covering grout care, sealing schedules, and long-term maintenance — so the installation performs as designed for years ahead.
Reach our team by phone at +1 (310) 890-4885 or visit us at 4419 Van Nuys Blvd, Suite 407, Sherman Oaks, CA 91403. Open Sunday through Thursday from 8 AM to 6 PM, Friday from 8 AM to 2 PM, closed on Saturday.
14 questions answered
Backsplash installation cost in Los Angeles varies based on material choice, square footage, and complexity of the layout. Natural stone like marble and Calacatta run higher than ceramic subway tile due to material cost, more involved cutting, and sealing requirements. Jobs that include outlet cutouts, irregular wall surfaces, or full-height coverage above a range also take more labor than a simple horizontal strip behind a countertop. The best way to get an accurate figure is to request a free online estimate with photos of your space.
Glass tile backsplash is generally more expensive than standard ceramic or porcelain subway tile because it requires diamond blade wet-saw cuts, color-matched or white thinset to prevent show-through, and more precise installation to avoid chipping. Mosaic glass on mesh sheets adds seam-alignment labor that ceramic tile does not. For homeowners on a moderate budget who want visual interest, ceramic mosaic or a classic subway tile in a herringbone pattern often achieves a similar design impact at a lower total cost.
A standard kitchen backsplash installation typically takes one to two days for tile setting, with an additional day for grout curing before the surface can be exposed to moisture or light cleaning. More complex jobs — full-height marble behind a range, mesh-mounted mosaic with many field cuts, or a bathroom vanity backsplash requiring substrate work — can extend the timeline. Scheduling depends on material lead time and whether the backsplash is part of a larger kitchen or bathroom remodel.
A standalone backsplash installation does not typically require a building permit in Los Angeles because it is a surface finish, not a structural or mechanical change. However, if the backsplash is part of a larger kitchen remodel that involves electrical outlet relocation, plumbing changes, or wall modifications, permits will be required for those associated trades. A licensed general contractor can determine exactly which permits apply to your full scope of work and pull them on your behalf.
Marble is a natural stone with unique veining patterns that no two slabs replicate exactly, but it is porous and requires sealing to resist staining from cooking oils, acidic foods, and water. Porcelain is a manufactured tile fired at high density, making it non-porous, scratch-resistant, and easier to maintain with no sealing requirement. Many porcelain tiles are now produced to mimic marble veining closely, giving homeowners a lower-maintenance option that still achieves a high-end look. The right choice depends on your tolerance for maintenance versus the premium aesthetic of real stone.
Installing new tile over existing tile is possible in some cases but is not always recommended. The existing tile must be fully adhered with no hollow spots, the wall must be able to bear the added weight, and the additional thickness must not interfere with outlets, cabinet edges, or countertop height. In many kitchens and bathrooms, removing the old tile and starting with a clean, properly prepared substrate produces a more durable and visually flat result. A professional assessment of your current surface is the right first step.
Epoxy grout is highly stain-resistant and does not require sealing, making it a strong choice for kitchen backsplashes exposed to cooking grease and moisture. Unsanded grout works best for narrow joints common in subway tile and glass mosaic installations, while sanded grout suits wider joints in natural stone and larger-format tile. Grout color is a design decision with lasting consequences — light grout shows staining more readily in a cooking zone, while a medium or charcoal tone tends to hold its appearance longer between cleanings.
The backsplash should either complement or intentionally contrast your countertop material — a busy veined quartz or marble countertop pairs well with a simpler subway tile, while a solid-color or matte countertop can support a more detailed mosaic or natural stone backsplash without visual competition. Grout color coordination with countertop tone prevents a disjointed finish. When a backsplash and countertop installation are handled by the same contractor, these decisions are made together so the final result is cohesive rather than assembled piecemeal.
In a bathroom, the backsplash behind a vanity is a wet zone that needs a waterproofed substrate and a tile material that handles moisture without degrading. Glass tile, porcelain mosaic, and sealed natural stone are all strong choices. Painted drywall behind a vanity is not a suitable substrate regardless of tile selection — proper installation involves removing it and replacing it with a waterproofed backer. A bathroom backsplash also tends to be a smaller surface area than a kitchen, which makes it a practical opportunity to use a more premium material.
The process starts with a free online estimate — you can send photos and project details to receive a written quote without an onsite visit. Once the scope is confirmed, the team handles template layout to map the full surface including outlets, cabinet edges, and any irregular wall angles before a single tile is cut. Material selection, grout color, and pattern orientation are finalized before work begins so there are no surprises mid-installation. The job includes precision cutting, tile setting, and complete grout work as a finished deliverable.
Los Angeles Kitchen and Bathroom Remodeling has been serving Sherman Oaks, Encino, Studio City, Calabasas, and the broader San Fernando Valley as a licensed kitchen and bathroom remodeling contractor since 2019. Backsplash installation is one of the most requested services the company handles, covering subway tile, mosaic, marble, glass, and natural stone across both kitchens and bathrooms. The team is set up as a licensed general contractor, meaning backsplash work on complex jobs is coordinated with countertop replacement, cabinetry, and adjacent plumbing or electrical trades under one point of contact.
Professional backsplash installation is worth it when the job involves natural stone that requires sealing, glass tile that chips under improper cutting, mosaic sheets that need precise seam alignment, or any surface with outlets, switch plates, or cabinet junctions demanding field cuts. These are the exact points where DIY installations most visibly fail — uneven rows, cracked tiles around cutouts, and grout that absorbs moisture because it was mixed or cured incorrectly. For a basic ceramic tile installation on a flat, uncomplicated surface, a skilled DIYer can achieve adequate results, but most kitchen and bathroom settings in the San Fernando Valley include at least one complicating factor.
Backsplash installation is routinely combined with kitchen remodels that include countertop replacement, custom cabinetry, or kitchen island work, and this sequencing produces the best outcome. Countertops are installed first, then the backsplash is templated to meet the countertop edge precisely and continue up to the underside of the upper cabinets. When both trades are managed by the same contractor, grout color is matched to countertop tone, tile pattern is coordinated with cabinet style, and no scheduling gap leaves one trade's work looking inconsistent with another's.
Natural stone backsplashes — marble, travertine, slate, and similar materials — are porous and must be sealed at installation and periodically resealed depending on how heavily the surface is used. In a cooking zone exposed to steam, oil, and acidic foods, an unsealed or worn-sealed stone backsplash will absorb staining that becomes difficult to remove without professional cleaning. Los Angeles tap water also has mineral content that can leave calcium deposits on polished stone surfaces over time, making routine wiping with a pH-neutral cleaner an important maintenance habit.
This company did an amazing job remodeling my bathroom. The quality of the work was outstanding, the crew was professional, and everything turned out even better than I expected. Their pricing was very fair, and the value for the quality of work was excellent. I was so happy with the results that I've already referred them to my neighbors. I would definitely recommend them to anyone looking for a reliable and honest contractor.
Shiki is the best contractor!! I had major water damage at my house and he restored my house. Looks better than new like no damage was ever there before. My go to for any project!
We recently completed a full kitchen, bathroom, and new flooring project with AAA Construction & Remodeling, and the experience was excellent. The quality of work was outstanding, with great attention to detail in every part of the project. The kitchen came out beautiful, the bathroom looks modern and clean, and the new floors completely transformed the house. The team was professional, reliable, and easy to work with throughout the entire process. Everything was done on time, and communication was clear from start to finish. On top of that, the pricing was very fair for the level of quality delivered. Highly recommended for anyone looking for a trustworthy remodeling company.
When we purchased our home, it required extensive upgrades and a complete transformation. The team at All America Affordable Construction, along with Shiki, exceeded every expectation. They handled the entire project—from the kitchen and bathrooms to flooring and lighting—with exceptional craftsmanship and attention to detail. The final result is absolutely stunning, and the entire process was smooth and professional from start to finish. I highly recommend their team to anyone looking for quality work and a reliable construction company.
Shiki from All America Affordable Construction did a complete renovation of our home and we couldn't be happier. New kitchen, bathrooms, flooring, everything came out beautiful. Shiki was always available, honest, and very knowledgeable. His crew works fast and clean. Highly recommended for anyone planning a full house remodel.
We recently completed a full house renovation with All America Affordable Construction, and the experience was amazing. Shiki and his team handled everything from start to finish with professionalism and great attention to detail. The quality of the work exceeded our expectations and the project was completed on time. If you are looking for a reliable contractor for a total home renovation, l highly recommend Shiki and his company.
Have a question or need a quote? We'd love to hear from you.
Send us a message and our team will get back to you within 24 hours.
Call Us
Response Time
Within 24 hours
We would love to hear from you
| Sun | 8:00 AM – 6:00 PM |
|---|---|
| Mon | 8:00 AM – 6:00 PM |
| Tue | 8:00 AM – 6:00 PM |
| Wed | 8:00 AM – 6:00 PM |
| Thu | 8:00 AM – 6:00 PM |
| Fri | 8:00 AM – 2:00 PM |
| Sat | Closed |
